Test Mode - Datalogic Magellan 8300 Product Reference Manual

Test Mode

NOTE
Product Reference Guide
Use this feature to place the scanner into a testing, or "demo" mode.
This special mode disables the scanner interface, meaning that bar
code data is not sent out to the host via the scanner interface. This
allows the bar code to be scanned continuously without requiring a
response from the POS terminal.
To return the scanner to normal function, scan the TEST MODE =
DISABLE on page 105 bar code below.
DO NOT scan the SWITCH bar code before and after scanning the bar
codes on this page.
Scanning the TEST MODE = DISABLE on page 105 bar code sets the
Double Read Timeout to 600ms.
LED and Beeper Indicators
TEST MODE = DISABLE
TEST MODE = ENABLE
105