Datalogic Magellan 8300 Product Reference Manual page 52

Hide thumbs Also See for Magellan 8300:

Table of Contents

Figure 25. Physical Measurements: Remote Display

Dual Display

5. Feed the entire length of the Remote Scale Display interface

cable through the cable routing hole so that the assembled

Remote Scale Display can be positioned over the mounting

screw holes.

6. If present, remove the rubber band from the connector end.

7. Install mounting screws or bolts to complete the installation of

the Remote Scale Display. Take care not to pinch or pierce the

interface cable while securing the Remote Scale Display to the

Single Display

Magellan™ 8300/8400

Magellan 8400