I 2 of 5 Length Control
NOTE
Product Reference Guide
This feature specifies whether variable-length or fixed-length
decoding will be set for I 2 of 5.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
You must now set the features I 2 of 5 Length 1 on page 396 and I 2
of 5 Length 2 on page 397
I 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH
I 2 OF 5 LENGTH CONTROL = FIXED-LENGTH
Interleaved 2 of 5 (I 2 of 5) Enable
.
395