Code 39 Length 2 - Datalogic Magellan 8300 Product Reference Manual

Code 39 Length 2

Product Reference Guide
Length 2 is the maximum label length if in variable length mode, or
the second fixed length if in fixed length mode (see Code 39 Length
Control on page 367
characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODE 39 LENGTH 2 on page 369
below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired fixed label length. A setting of 000
will ignore this length (only one fixed length), otherwise, the
selectable range for this option is 001 to 050. Pad all single
and double digit numbers with leading zeroes to yield a three-
digit entry (001-050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
) . Length includes the barcode's check and data
SET CODE 39 LENGTH 2
Code 39 Enable
369