Whichboot; Boot System - Edge-Core ES3528-WDM Management Manual

Example
The following example shows how to display all file information:
Console#dir
File name
-------------------------------------
Unit1:
D1.0.0.7.bix
V1.0.1.7.bix
Factory_Default_Config.cfg
startup1.cfg
---------------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Console#whichboot
-------------------------------- -------------- ------- -----------
Unit1:
D1.0.0.7.bix
V1.0.1.7.bix
startup1.cfg
Console#

boot system

This command specifies the file or image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
• boot-rom* - Boot ROM.
• config* - Configuration file.
• opcode* - Run-time operation code.
• filename - Name of configuration file or code image.
File name File type Startup Size (byte)
File Management Commands
File type Startup Size (byte)
-------------- ------- -----------
Boot-Rom Image Y
Operation Code Y
Config File N
Config File Y
Total free space:
Boot-Rom Image Y
Operation Code Y
Config File Y
19
1159752
3542608
526
3256
10223616
1159752
3542608
3256
19-17