Default Setting
None
Command Mode
Privileged Exec
Command Usage
◆
If you enter the command dir without any parameters, the system displays all
files.
File information is shown below:
Table 16: File Directory Information
Column Heading
File Name
File Type
Startup
Create Time
Size
Example
The following example shows how to display all file information:
Console#dir
-------------------------- -------------- ------- ------------------- ---------
Unit 1:
ECS4210-series_V1.0.0.4.bix
ECS4210-series_V1.0.0.5.bix
Factory_Default_Config.cfg
startup1.cfg
-----------------------------------------------------------------------------
Console#
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The date and time the file was created.
The length of the file in bytes.
File Name
Free space for compressed user config files:
– 109 –
Chapter 4
| System Management Commands
Type
Startup Modify Time
OpCode
N
2012-12-28 10:17:22
OpCode
Y
2012-12-28 10:48:45
Config
N
2012-12-28 14:20:26
Config
Y
2012-12-28 09:52:15
File Management
Size(bytes)
8924092
8924092
455
1539
1462272