Table of Contents
Advertisement
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir
File name
-------------------------------------
Unit1:
Unit1:
ES4626_50F_DIAG_V1.1.0.1.BIX
ES4626_50F-FLF-38_V1.1.0.2.BIX
Factory_Default_Config.cfg
startup1.cfg
---------------------------------------------------------------------------
Console#
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Console#whichboot
-------------------------------- -------------- ------- -----------
Unit1:
ES4626_50F_DIAG_V1.1.0.1.BIX
ES4626_50F-FLF-38_V1.1.0.2.BIX
startup1.cfg
Console#
Table 23-6 File Directory Information
Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
File name
File type Startup Size (byte)
File Management Commands
File type
Startup Size (byte)
--------------
------- -----------
Boot-Rom Image
Y
Operation Code
Y
Config File
N
Config File
Y
Total free space:
Boot-Rom Image
Y
Operation Code
Y
Config File
Y
23
1595976
4973264
455
3653
58851328
1595976
4973264
3653
23-15
Advertisement
Table of Contents
