copy
This command moves (upload/download) a code image or configuration file
between the switch's flash memory and an FTP/TFTP server or a USB memory stick.
When you save the system code or configuration settings to a file on an FTP/TFTP
server, that file can later be downloaded to the switch to restore system operation.
The success of the file transfer depends on the accessibility of the FTP/TFTP server
and the quality of the network connection.
Syntax
copy file {file | ftp | running-config | startup-config | tftp}
copy ftp {add-to-running-config | file | https-certificate | public-key |
running-config | startup-config}
copy running-config {file | ftp | startup-config | tftp}
copy startup-config {file | ftp | running-config | tftp}
copy tftp {add-to-running-config | file | https-certificate | public-key |
running-config | startup-config}
copy usbdisk file
add-to-running-config - Keyword that adds the settings listed in the
specified file to the running configuration.
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS secure site
certificate.
public-key - Keyword that allows you to copy a SSH key from a TFTP server.
(See "Secure Shell" on page
running-config - Keyword that allows you to copy to/from the current
running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
usbdisk - Keyword that allows you to copy to/from a USB memory stick.
(USB slot only supports simple data storage devices using a FAT16/32 file
system with or without a partition table.)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
◆
The system prompts for data required to complete the copy command.
◆
The destination file name should not contain slashes (\ or /), and the maximum
length for file names is 32 characters for files on the switch or 128 characters for
files on the server. (Valid characters: A-Z, a-z, 0-9, ". " , "-")
Chapter 4
230.)
– 129 –
| System Management Commands
File Management