Figure 7: Copy Firmware - Edge-Core ECS4810-12M Layer 2 Management Manual

| Basic Management Tasks
C 4
HAPTER
Managing System Files
Up to two copies of the system software (i.e., the runtime firmware)
N :
OTE
can be stored in the file directory on the switch.
The maximum number of user-defined configuration files is limited
N :
OTE
only by available flash memory space.
The file
N : "Factory_Default_Config.cfg"
OTE
or management station, but cannot be used as the destination file name on
the switch.
W I
EB NTERFACE
To copy firmware files:
Click System, then File.
1.
Select Copy from the Action list.
2.
Select FTP Upgrade, HTTP Upgrade, or TFTP Upgrade as the file transfer
3.
method.
If FTP or TFTP Upgrade is used, enter the IP address of the file server.
4.
If FTP Upgrade is used, enter the user name and password for your
5.
account on the FTP server.
Set the file type to Operation Code.
6.
Enter the name of the file to download.
7.
Select a file on the switch to overwrite or specify a new file name.
8.
Then click Apply.
9.

Figure 7: Copy Firmware

If you replaced a file currently used for startup and want to start using the
new file, reboot the system via the System > Reset menu.
– 110 –
can be copied to a file server