Alcatel-Lucent 7750 SR OS Service Manual page 83

assignment
Syntax assignment {port port-id | card slot-number}
no assignment
Context config>service>customer>multi-service-site
Description
This command assigns a multi-service customer site to a specific chassis slot, port, or channel. This
allows the system to allocate the resources necessary to create the virtual schedulers defined in the
ingress and egress scheduler policies as they are specified. This also verifies that each SAP assigned
to the site exists within the context of the proper customer ID and that the SAP was configured on the
proper slot, port, or channel. The assignment must be given prior to any SAP associations with the
site.
The no form of the command removes the port, channel, or slot assignment. If the customer site has
not yet been assigned, the command has no effect and returns without any warnings or messages.
Default
None
Parameters
port port-id — The port keyword is used to assign the multi-service customer site to the port-id or
7750 SR OS Services Guide
If the customer-site-name does not exist, it is assumed that an attempt is being made to create a
site of that name in the customer ID context. The success of the command execution depends on
the following:
• The maximum number of customer sites defined for the chassis has not been met.
• The customer-site-name is valid.
• The create keyword is included in the command line syntax (if the system requires it).
When the maximum number of customer sites has been exceeded a configuration error occurs;
the command will not execute and the CLI context will not change.
If the customer-site-name is invalid, a syntax error occurs; the command will not execute and the
CLI context will not change.
Values
Valid names consist of any string up to 32 characters long composed of printable, 7-
bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
port-id.channel-id given. When the multi-service customer site has been assigned to a specific
port or channel, all SAPs associated with this customer site must be on a service owned by the
customer and created on the defined port or channel. The defined port or channel must already
have been pre-provisioned on the system but need not be installed when the customer site
assignment is made.
Syntax:
port-id[:encap-val]
Values
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps
group-id
bundle-type-slot/mda.bundle-num
bundle
type
bundle-num 1 — 128
bpgrp-id: bpgrp-type-bpgrp-num
Subscriber Services
keyword
1 — 64
keyword
ima, ppp
Page 83