Modifying Lsps; Deleting Lsps - Alcatel-Lucent 7750 SR OS Service Manual

Modifying LSPs

Although the CLI command descriptions are discussed in the MPLS chapter of this book, the
syntax is repeated in this section as a quick reference.
To access a specific LSP, you must specify the LSP ID. To display a list of LSPs, use the
router mpls lsp
limit
CLI Syntax: config>router>mpls# lsp lsp-name
Example

Deleting LSPs

The no form of the
LSP can be deleted, the LSP must be removed from all SDP associations. The SDP must be
administratively disabled before deleting LSPs.
CLI Syntax: config>router# mpls
CLI Syntax: config>service# sdp sdp-id
Example
7750 SR OS Services Guide
config>service>epipe# exit
config>service# no sdp 79
command. Enter the parameter, such as
, , and
primary secondary
:
config>router>mpls# lsp to-headquarters
config>router>mpls>lsp# fast-reroute hop-limit 35
config>router>mpls>lsp# primary to-104
config>router>mpls>lsp# bandwidth 50000
config>router>mpls>lsp# no shutdown
command removes an LSP ID and all associated information. Before an
lsp
[no] lsp lsp-name
shutdown
[no] lsp lsp-name
:
config>service# sdp 79
config>service>sdp# no lsp 123
config>service>sdp# exit all
# config router
config>router# mpls
config>router>mpls# lsp 123
config>router>mpls>lsp# shutdown
config>router>mpls>lsp# exit
config>router>mpls# no lsp 123
, and then enter the new information.
Services
, ,
from to retry-timer, retry-
Page 73
show