Alcatel-Lucent 7750 SR OS Service Manual page 156

Configuring a VLL Service with CLI
Table 1: CLI Commands to Configure VLL Service Parameters (Continued)
Command
cbs
high-prio-only
mbs
rate
scheduler-policy
multi-service-site
no shutdown
Configure Fpipe spoke SDP parameters
config>service>fpipe# spoke-sdp sdp-id:vc-id [no-endpoint]
config>service>fpipe# spoke-sdp sdp-id:vc-id [endpoint endpoint-name] [icb]
egress
ingress
filter
vc-label
precedence
no shutdown
Configure an Ipipe service
config>service# ipipe service-id [customer customer-id][vpn vpn-id] [vc-switching]
service-id
customer
vpn vpn-id
no shutdown
description
endpoint
Configure an Ipipe SAP
config>service>ipipe# sap sap-id
accounting-policy
Page 156
Specifies attributes of the CBS parameters.
Specifies attributes of the high-prio-only parameters.
Specifies attributes of the MBS parameters.
Specifies attributes of the Peak Information Rate (PIR) and the
Committed Information Rate (CIR) parameters.
Applies an existing scheduler policy to an ingress or egress scheduler
used by SAP queues associated with a multi-service customer site.
Creates a new customer site or edits an existing customer site with the
customer-site-name parameter.
Administratively enables the SAP.
Configures the egress spoke SDP context.
Configures the ingress spoke SDP context.
Associates an IP filter policy with an ingress or egress Service
Distribution Point (SDP).
Configures the egress or ingress VC label.
Specifies the precedence of this SDP bind when there are multiple
SDP binds attached to one service endpoint.
Administratively enables the spoke SDP binding
Specifies a unique service identification number identifying the
service in the service domain.
Specifies the customer ID number to be associated with the service.
Specifies the VPN ID number which allows you to identify virtual
private networks (VPNs) by a VPN identification number.
Administratively enables the service.
Specifies a text string describing the Ipipe service.
Specifies a service endpoint.
Associates the accounting policy ID to the SAP. Accounting policies
are configured in the
config>log
Description
context.
7750 SR OS Services Guide
Page
255
256
257
258
262
246
233
271
271
271
272
128
233
237
237
237
233
233
238
248