Service Components; Figure 11: Subscriber Service Components - Alcatel-Lucent 7750 SR OS Service Manual

Service Creation Process Overview

Service Components

Figure 11
CUSTOMER ID:
SERVICE TYPE
SERVICE ID
SAP (for EPIPE and VPLS services)
INTERFACE (for IES and VPRN services)
SDP ID (for distributed services)
•
•
•
•
•
•
•
•
•
Page 50
displays the basic components of a subscriber service.
SAP
FAR-END
LSP (for MPLS encapsulation)

Figure 11: Subscriber Service Components

Customer ID — This is the subscriber ID used to associate information with a particular
customer.
Service type — The service type specifies the connectivity type such as Epipe, VPLS, or
IES.
Service ID — Each service is uniquely identified by a Service ID within a service area.
SAP — The subscriber-side service entry (access) and exit point for a service on an
Alcatel-Lucent 7750 SR router.
Interface — Configure a logical IP routing interface for Internet Ethernet Service (IES),
Virtual Private LAN Service (VPLS), and Virtual Private Routed Network (VPRN)
services.
Port ID — The physical port identifier portion of the SAP definition.
QoS policy — The QoS policy associated with an ingress or egress SAP or IP interface.
QoS policy ID 1 is the default.
Filter policy — Optional. The IP or MAC filter policy associated with an ingress or egress
SAP or IP interface.
Scheduler policy — Optional. A scheduler policy defines the hierarchy and operating
parameters for virtual schedulers. This implementation of hierarchical scheduling is a
method that defines a bounded operation for a group of queues. One or more queues are
PORT ID
QoS POLICY (default)
INGRESS
FILTER POLICY (optional)
EGRESS
SCHEDULER POLICY (optional)
PORT ID
INGRESS
EGRESS
7750 SR OS Services Guide
QoS POLICY (default)
FILTER POLICY (optional)
SCHEDULER POLICY (optional)