List Of Commands - Alcatel-Lucent 7750 SR OS Service Manual

List of Commands

List of Commands
Table 2
indicating the configuration level at which each command is implemented with a short command
description.
The services command list is organized in the following task-oriented manner:
•
•
•
Table 1: CLI Commands to Configure Service Parameters
Command
Configuring a customer account
config>service
customer
contact
description
multi-service-site
assignment
description
egress
agg-rate-limit
ingress
tod-suite
Page 58
lists all the configuration commands to configure subscriber accounts and SDPs,
Configuring a customer account
Configuring an SDP
→
Configuring SDP class forwarding parameters
→
Configure SDP Keepalive parameters
Creates a customer ID and customer context that is used to associate
information with a particular customer.
Creates a customer ID and customer context that is used to associate
information with a particular customer.
Creates a text description stored in the configuration file for the cus-
tomer.
Creates a new customer site or edits an existing customer site. A cus-
tomer site is an anchor point to create an ingress and egress virtual
scheduler hierarchy. Multi-service customer sites create a virtual
scheduler hierarchy and making it available to queues on multiple Ser-
vice Access Points (SAPs).
Specifies the port for the multi-service.
Creates a text description stored in the configuration file for a configu-
ration context for the multi-service-site.
Specifies egress parameters and policies.
Defines a maximum total rate for all egress queues on a service SAP
or multi-service site.
Specifies ingress parameters and policies.
Configures a time-of-day suite for this multi-service site.
Description
7750 SR OS Services Guide
Page
64
81
81
79
82
83
79
84
85
84
89