Configuring Vll Resilience; Figure 31: Vll Resilience - Alcatel-Lucent 7750 SR OS Service Manual

Configuring VLL Resilience

The following is an example to create VLL resilience. Note that the zero revert-time value means
that the VLL path will be switched back to the primary immediately after it comes back up.
sap 1/1/1:100
For PE1:
Example
7750 SR OS Services Guide
spoke-sdp 1:100
PE 1
spoke-sdp 2:200
Figure 3: VLL Resilience
:
config>service# epipe 12 customer 1 vc-switching create
config>service>epipe$ endpoint x create
config>service>epipe>endpoint$ exit
config>service>epipe# endpoint y create
config>service>epipe>endpoint# revert-time 0
config>service>epipe>endpoint# exit
config>service>epipe# sap 1/1/1:100 endpoint x create
config>service>epipe>sap$ exit
config>service>epipe# spoke-sdp 1:100 endpoint y create
config>service>epipe>spoke-sdp$ precedence primary
config>service>epipe>spoke-sdp$ exit
config>service>epipe# spoke-sdp 2:200 endpoint y create
config>service>epipe>spoke-sdp$ precedence 1
config>service>epipe>spoke-sdp$ no shutdown
config>service>epipe>spoke-sdp$ exit
config>service>epipe# no shutdown
Virtual Leased Line Services
PE 2
sap 2/2/2:200
sap 3/3/300
PE 3
BRAS
Page 199