Alcatel-Lucent 7750 SR OS Service Manual page 311

Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id — Displays only information for the specified SDP ID.
far-end ip-addr — Displays only SDPs matching the specified far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields:
7750 SR OS Services Guide
Default
All SDPs.
Values
1 — 17407
Default
SDPs with any far-end IP address.
Label
The SDP identifier.
Sdp Id
Type Indicates whether the SDP is a spoke or a mesh.
Name of the split horizon group that the SDP belongs to.
Split Horizon
Group
Displays the VC type, ether, vlan, or vpls.
VC Type
Displays the explicit dot1Q value used when encapsulating to the SDP far
VC Tag
end.
The VC label used by the far-end device to send packets to this device in
I. Lbl
this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
Admin Path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
Oper Path MTU The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to be
fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
Far End
defined by this SDP.
Delivery Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
Admin State
The current state of this SDP.
Oper State
The label used by the far-end device to send packets to this device in this
Ingress Label
service by this SDP.
The label used by this device to send packets to the far-end device in this
Egress Label
service by the SDP.
Virtual Leased Line Services
Description
Page 311