Alcatel-Lucent 7750 SR OS Service Manual page 247

tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>apipe>sap
config>service>epipe>sap
config>service>fpipe>sap
config>service>ipipe>sap
Description
This command applies a time-based policy (filter or QoS policy) to the service SAP. The suite name
must already exist in the config>cron context.
Default
no tod-suite
Parameters
tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
mac
Syntax [no] mac ieee-address
Context config>service>ipipe>sap
Description
This command assigns a specific MAC address to an Ipipe SAP.
The no form of this command returns the MAC address of the SAP to the default value.
Default
The default is the physical MAC address associated with the Ethernet interface where the SAP is
configured.
Parameters
ieee-address — Specifies the 48-bit MAC address in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
mac-refresh
Syntax mac-refresh refresh interval
no mac-refresh
Context config>service>ipipe>sap
Description
This command specifies the interval between ARP requests sent on this Ipipe SAP. When the SAP is
first enabled, an ARP request will be sent to the attached CE device and the received MAC address
will be used in addressing unicast traffic to the CE. Although this MAC address will not expire while
the Ipipe SAP is enabled and operational, it is verified by sending periodic ARP requests at the
specified interval.
The no form of this command restores mac-refresh to the default value.
Default
14400
Parameters
refresh interval — Specifies the interval, in seconds, between ARP requests sent on this Ipipe SAP.
7750 SR OS Services Guide
full or partial behavior of a SAP. The suite can be applied to more than one SAP.
where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
Values
0 — 65535
Virtual Leased Line Services
Page 247