Alcatel-Lucent 7750 SR OS Service Manual page 151

Table 1: CLI Commands to Configure VLL Service Parameters (Continued)
Command
filter
qos
queue-override
queue
avg-frame-overhead
adaptation-rule
cbs
high-prio-only
mbs
rate
scheduler-override
scheduler-policy
Configure Epipe SAP ingress parameters
config>service>epipe>sap#
ingress
filter
match-qinq-dot1p
qos
queue-override
queue
adaptation-rule
cbs
high-prio-only
mbs
7750 SR OS Services Guide
Associates an IP filter policy or MAC filter policy with an egress SAP
or IP interface.
Associates a Quality of Service (QoS) policy with an egress SAP or IP
interface.
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Configures the average frame overhead to define the average
percentage that the offered load to a queue will expand during the
frame encapsulation process before sending traffic on-the-wire.
Specifies attributes of the adaptation rule parameters.
Specifies attributes of the CBS parameters.
Specifies attributes of the high-prio-only parameters.
Specifies attributes of the MBS parameters.
Specifies attributes of the Peak Information Rate (PIR) and the
Committed Information Rate (CIR) parameters.
Specifies the set of attributes whose values have been overridden via
management on this virtual scheduler.
Associates an existing scheduler policy to an egress scheduler used by
SAP queues associated with this multi-service customer site.
Configures ingress SAP QoS policies and filter policies.
Associates an IP filter policy or MAC filter policy with an ingress
SAP or IP interface.
Configures filtering based on the p-bits in the top or bottom tag of a
Q-in-Q encapsulated Ethernet frame.
Associates a Quality of Service (QoS) policy with an ingress SAP or
IP interface.
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Specifies the queue's adaptation rule parameters.
Specifies the queue's CBS parameters.
Specifies the specified high-prio-only parameters.
Specifies the specified MBS parameters.
Virtual Leased Line Services
Description Page
249
251
252
252
254
253
255
256
257
258
259
262
249
249
263
251
252
252
253
255
256
257
Page 151