Alcatel-Lucent 7750 SR OS Service Manual page 61

Table 1: CLI Commands to Configure Service Parameters (Continued)
Command
Configure SDP Keepalive parameters
config>service>sdp# lsp lsp-name
keep-alive
hello-time
hold-down-time
max-drop-count
message-length
no shutdown
7750 SR OS Services Guide
Configures SDP connectivity monitoring keepalive messages for the
SDP ID.
Configures the time period between SDP keepalive messages on the
SDP-ID for the SDP connectivity monitoring messages.
Configures the minimum time period the SDP will remain in the oper-
ationally down state in response to SDP keepalive monitoring.
Configures the number of consecutive SDP keepalive failed request
attempts or remote replies that can be missed after which the SDP is
operationally downed.
Configures the size of SDP monitoring keepalive request messages.
Administratively enables the keepalive messages.
Description
Services
Page
97
98
98
98
99
79
Page 61