Alcatel-Lucent 7750 SR OS Service Manual page 153

Table 1: CLI Commands to Configure VLL Service Parameters (Continued)
Command
vc-type
Configure Apipe service parameters
config>service>apipe#
description
interworking
service-mtu
no shutdown
Configure Apipe SAP parameters
config>service>apipe# sap
accounting-policy
collect-stats
egress
ingress
qos
queue-override
queue
avg-frame-overhead
adaptation-rule
cbs
high-prio-only
mbs
rate
scheduler-policy
multi-service-site
no shutdown
7750 SR OS Services Guide
Specifies a 15 bit value that defines the type of the VC signaled to the
peer.
Specifies a text string describing the service.
Specifies the interworking function that should be applied for packets
that ingress/egress SAPs that are part of an Apipe service.
Configures the MTU to be used for this service.
Administratively enables the Apipe service.
Specifies the accounting policy to apply to the SAP.
Enables the collection of accounting and statistical data for the SAP or
network port.
Enables a context to configure egress SAP Quality of Service (QoS)
policies.
Enables a context to configure ingress SAP Quality of Service (QoS)
policies.
Associates a Quality of Service (QoS) policy with an ingress or egress
Service Access Point (SAP).
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Configures the average frame overhead to define the average
percentage that the offered load to a queue will expand during the
frame encapsulation process before sending traffic on-the-wire.
Specifies attributes of the adaptation rule parameters.
Specifies attributes of the CBS parameters.
Specifies attributes of the high-prio-only parameters.
Specifies attributes of the MBS parameters.
Specifies attributes of the Peak Information Rate (PIR) and the
Committed Information Rate (CIR) parameters.
Applies an existing scheduler policy to an ingress or egress scheduler
used by SAP queues associated with a multi-service customer site.
Associates a customer site with the customer-site-name parameter.
Administratively enables the SAP.
Virtual Leased Line Services
Description Page
236
234
239
239
233
248
248
249
249
251
252
252
254
253
255
256
257
258
262
246
233
Page 153