Basic Configurations; Configuring An Epipe Service - Alcatel-Lucent 7750 SR OS Service Manual

Configuring a VLL Service with CLI

Basic Configurations

•
•
•
•
•
•

Configuring an Epipe Service

The following fields require specific input (there are no defaults) to configure a basic Epipe
service:
•
•
•
The following example displays a sample configuration of a local Epipe service configured on
ALA-12.
*A:ALA-12>config>service# info
#------------------------------------------
...
...
#------------------------------------------
*A:ALA-12>config>service#
The following example displays a sample configuration of a distributed Epipe service between
ALA-1 and ALA-2.
*A:ALA-1>config>service>epipe# info
----------------------------------------------
Page 160
Configuring an Epipe Service on page 160
Configuring an Apipe Service on page 162
Configuring an Fpipe Service on page 163
Configuring an Ipipe Service on page 165
Using Spoke SDP Control Words on page 191
Pseudowire Configuration Notes on page 193
→
Configuring Two VLL Paths Terminating on T-PE2 on page 195
→
Configuring VLL Resilience on page 199
→
Configuring VLL Resilience for a Switched Pseudowire Path on page 201
Customer ID (see Configuring Customers on page
For a local service, two SAPs must be configured specifying the source and destination
ports
For a distributed service, one SAP and one SDP must be specified
epipe 7 customer 6 vpn 7 create
description "Local epipe service"
sap 1/1/6:0 create
exit
sap 2/1/8:0 create
exit
exit
description "Distributed Epipe service to east coast"
sap 5/1/2:0 create
64)
7750 SR OS Services Guide