Alcatel-Lucent 7750 SR OS Service Manual page 284

VLL Service Configuration Commands
5/1/1:0/16 511116
5/1/1:0/17 511117
5/1/1:0/18 511118
5/1/1:0/19 511119
5/1/1:0/20 511120
5/1/1:0/21 511121
5/1/1:0/22 511122
5/1/1:0/23 511123
5/1/1:0/24 511124
5/1/1:0/25 511125
...
===============================================================================
*A:ALA-12#
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context show>service
Description
Displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters
sdp-id — The SDP ID for which to display information.
far-end ip-address — Displays only SDPs matching with the specified far-end IP address.
detail — Displays detailed SDP information.
keep-alive-history — Displays the last fifty SDP keepalive events for the SDP.
Output Show Service SDP — The following table describes show service SDP output fields:
Page 284
2
2
2
2
2
2
2
2
2
2
Default
All SDPs.
Values
1 — 17407
Default
SDPs with any far-end IP address.
Default
SDP summary output.
Default
SDP summary output.
Label
SDP Id
Adm MTU
Opr MTU
IP address
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
none 2 none
The SDP identifier.
Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without requiring
the packet to be fragmented.
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without requiring
the packet to be fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
7750 SR OS Services Guide
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
none Up Up
Description