Alcatel-Lucent 7750 SR OS Service Manual page 185

Configuring Fpipe SDP Bindings
Use the following CLI syntax to create a spoke SDP binding with an Fpipe service:
CLI Syntax: config>service# fpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {fr-dlci}][vc-switching]
The following example displays the command usage to create an Fpipe spoke SDP:
PE router 1 (A:ALA-41):
Example
PE router 2 (A:ALA-42):
Example
The following output displays the Fpipe spoke SDP configuration.
PE Router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
...
-------------------------------------
A:ALA-41>config>service#
7750 SR OS Services Guide
spoke-sdp sdp-id:vc-id
egress
filter ip ip-filter-id
vc-label egress-vc-label
ingress
filter ip ip-filter-id
vc-label ingress-vc-label
no shutdown
:
A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# spoke-sdp 1:1 create
A:ALA-41>config>service>spoke-sdp# no shutdown
A:ALA-41>config>service>spoke-sdp# exit
:
A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# spoke-sdp 1:1 create
A:ALA-42>config>service>spoke-sdp# no shutdown
A:ALA-42>config>service>spoke-sdp# exit
fpipe 1 customer 1 create
description "fpipe test"
service-mtu 1400
sap 1/2/1:16 create
ingress
qos 101
exit
egress
qos 1020
exit
exit
spoke-sdp 1:1 create
exit
no shutdown
exit
Virtual Leased Line Services
Page 185