Using Spoke Sdp Control Words - Alcatel-Lucent 7750 SR OS Service Manual

Using Spoke SDP Control Words

When control word is enabled, the Admin ControlWord is set to Preferred. It is necessary that both
sides of the VLL have control word enabled or disabled for the pipe to be up.
The control word state will be set to True or False depending on what is configured on both sides
of the VLL, either enabled (True) or disabled (False). When both sides are enabled (True) then the
state is True. If one side is enabled (True) but the other side is disabled (False), then the state is
False.
The command structure is the same for Ipipe and Apipe services. Apipe service data unit and
Fpipes do not need to be specified.
Example
for service id 2100"
for service id 2100"
The following displays the configuration:
*A:ALA-Dut-B>config>service>epipe# info
----------------------------------------------
----------------------------------------------
*A:ALA-Dut-B>config>service>epipe#
To disable the control word on spoke-sdp 1:2001:
Example
config>service>epipe>spoke-sdp$ exit
*A:ALA-Dut-B>config>service>epipe# info
----------------------------------------------
7750 SR OS Services Guide
:
config>service# epipe 2100 customer 1
config>service>epipe$ description "Default epipe description
config>service>epipe$ sap 1/2/7:4 create
config>service>epipe>sap$ description "Default sap description
config>service>epipe>sap$ exit
config>service>epipe# spoke-sdp 1:2001 create
config>service>epipe>spoke-sdp$ control-word
config>service>epipe>spoke-sdp$ exit
config>service>epipe# no shutdown
description "Default epipe description for service id 2100"
sap 1/2/7:4 create
description "Default sap description for service id 2100"
exit
spoke-sdp 1:2001 create
control-word
exit
no shutdown
:
config>service>epipe# spoke-sdp 1:2001 no control-word
description "Default epipe description for service id 2100"
sap 1/2/7:4 create
description "Default sap description for service id 2100"
exit
spoke-sdp 1:2001 create
Virtual Leased Line Services
Page 191