Creating An Ipipe Service - Alcatel-Lucent 7750 SR OS Service Manual

Creating an Ipipe Service

Use the following CLI syntax to create an Ipipe service.
CLI Syntax: config>service# ipipe service-id [customer customer-id] [vpn
vpn-id][vc-switching]
The following example displays the command usage to create an Epipe service:
Example
The following example displays the Epipe configuration:
ALA-1>config>service# info
-------------------------------------------
...
-------------------------------------------
ALA-1>config>service#
Configuring Ipipe SAP Parameters
Configuring ATM to Ethernet local Ipipe example:
Example
7750 SR OS Services Guide
description description-string
no shutdown
:
config>service# ipipe 202 customer 1 create
config>service>ipipe$ description "eth_ipipe"
config>service>ipipe# no shutdown
ipipe 202 customer 1 create
description "eth_ipipe"
no shutdown
exit
:
config>service# ipipe 202 customer 1 create
config>service>ipipe$ sap 1/1/2:444 create
config>service>ipipe>sap$ description "eth_ipipe"
config>service>ipipe>sap$ ce-address 31.31.31.1
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
config>service>ipipe# sap 1/3/2:445 create
config>service>ipipe>sap$ description "eth_ipipe"
config>service>ipipe>sap$ ce-address 31.31.31.2
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
Virtual Leased Line Services
Page 187