Configuring An Ipipe Service - Alcatel-Lucent 7750 SR OS Service Manual

Configuring an Ipipe Service

The following fields require specific input (there are no defaults) to configure basic Ipipe service:
•
•
•
The following example displays sample configurations of Ipipe services.
A:ALA-280>config>service>ipipe# info
----------------------------------------------
----------------------------------------------
A:ALA-280>config>service>ipipe#
A:ALA-49>config>service>ipipe# info
----------------------------------------------
----------------------------------------------
A:ALA-49>config>service>ipipe#
7750 SR OS Services Guide
Customer ID (refer to Configuring Customers on page
Specify SAP parameters
Specify spoke SDP parameters
sap 1/1/4:0 create
ingress
qos 2
exit
egress
qos 1010
exit
ce-address 10.40.30.10
mac 14:30:01:01:00:04
exit
spoke-sdp 3:100 create
ingress
filter ip 10
exit
ce-address 10.40.30.11
exit
no shutdown
sap 2/1/4:0 create
ingress
qos 2
exit
egress
qos 1010
exit
ce-address 128.251.10.10
exit
spoke-sdp 8:200 create
ingress
filter ip 10
exit
ce-address 128.251.10.11
exit
no shutdown
Virtual Leased Line Services
64)
Page 165