Alcatel-Lucent 7750 SR OS Service Manual page 252

Service router - mobile gateway

Hide thumbs Also See for 7750 SR OS:

Table of Contents

VLL Service Configuration Commands

policy-id — The ingress/egress policy ID to associate with SAP or IP interface on ingress/egress. The

shared-queuing — This keyword can only be specified on SAP ingress. The shared-queueing

queue-override

[no] queue-override

config>service>epipe>sap>egress

config>service>epipe>sap>ingress

config>service>apipe>sap>egress

config>service>apipe>sap>ingress

config>service>fpipe>sap>egress

config>service>fpipe>sap>ingress

config>service>ipipe>sap>egress

config>service>ipipe>sap>ingress

This command enables the context to configure override values for the specified SAP egress or

ingress QoS queue. These values override the corresponding ones specified in the associated SAP

egress or ingress QoS policy. If the policy was created as a template policy, this command overrides

the parameter and its description and queue parameters in the policy.

[no] queue queue-id

config>service>epipe>sap>egress>queue-override

config>service>epipe>sap>ingress>queue-override

config>service>apipe>sap>egress>queue-override

config>service>apipe>sap>ingress>queue-override

config>service>fpipe>sap>egress>queue-override

config>service>fpipe>sap>ingress>queue-override

config>service>ipipe>sap>egress>queue-override

config>service>ipipe>sap>ingress>queue-override

This command specifies the ID of the queue whose parameters are to be overridden.

queue-id — The queue ID whose parameters are to be overridden.

policy ID must already exist.

keyword specifies the shared queue policy will be used by this SAP. When the value of this

object is null, the SAP will use individual ingress QoS queues, instead of the shared ones.

7750 SR OS Services Guide