Alcatel-Lucent 7750 SR OS Service Manual page 236

VLL Service Configuration Commands
apipe
Syntax apipe service-id [customer customer-id] [vpn vpn-id] [vc-type {atm-vcc | atm-sdu | atm-
vpc | atm-cell}] [vc-switching]
no apipe service-id
Context config>service
Description
The Apipe service provides a point-to-point L2 VPN connection to a remote SAP or to another local
SAP. An Apipe can connect an ATM or Frame Relay endpoint either locally or over a PSN to a
remote endpoint of the same type or of a different type and perform interworking between the two
access technologies.
Parameters
service-id — The unique service identification number identifying the service in the service domain.
service-id
customer
customer customer-id — Specifies the customer ID number to be associated with the service. This
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
vpn-id
vc-type — Specifies a 15 bit value that defines the type of the VC signaled to the peer. Its values are
vc-type
vc-switching — Specifies if the pseudowire switching signalling is used for the spoke SDPs
fpipe
Syntax fpipe service-id [customer customer-id] [vpn vpn-id] [vc-type {fr-dlci}] [vc-switching]
no fpipe service-id
Context config>service
Description
This command configures an Fpipe service. An Fpipe provides a point-to-point L2 VPN connection
to a remote SAP or to another local SAP. A Fpipe connects only Frame Relay endpoints either locally
or over a PSN to a remote endpoint of the same type.
Page 236
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7750 SR on which this service is defined.
Values
1 — 2147483647
parameter is required on service creation and optional for service editing or deleting.
Values
1 — 2147483647
(VPNs) by a VPN identification number.
Values
1 — 2147483647
Default
null (0)
defined in draft-ietf-pwe3-iana-allocation and it defines both the signaled VC type as well as the
resulting datapath encapsulation over the Apipe.
Values
atm-vcc, atm-sdu, atm-vpc, atm-cell
Default
atm-sdu
configured in this service.
7750 SR OS Services Guide