Alcatel-Lucent 7750 SR OS Service Manual page 269

endpoint endpoint-name — Specifies the name of the service endpoint.
icb — Configures the spoke SDP as an inter-chassis backup SDP binding.
cell-concatenation
Syntax cell-concatenation
Context config>service>apipe>spoke-sdp
Description
This command enables the context to provide access to the various options that control the
termination of ATM cell concatenation into an MPLS frame. Several options can be configured
simultaneously. The concatenation process for a given MPLS packet ends when the first
concatenation termination condition is met. The concatenation parameters apply only to ATM N:1
cell mode VLL.
aal5-frame-aware
Syntax [no] aal5-frame-aware
Context config>service>apipe>spoke-sdp>cell-concat
Description
This command enables the configuration of AAL5 end-of-message (EOM) to be an indication to
complete the cell concatenation operation.
The no form of the command resets the configuration to ignore the AAL5 EOM as an indication to
complete the cell concatenation.
clp-change
Syntax [no] clp-change
Context
config>service>apipe>spoke-sdp>cell-concat
Description
This command enables the configuration of CLP change to be an indication to complete the cell
concatenation operation.
The no form of the command resets the configuration to ignore the CLP change as an indication to
complete the cell concatenation.
max-cells
Syntax max-cells cell-count
no max-cells [cell-count]
Context config>service>apipe>spoke-sdp>cell-concat
Description
This command enables the configuration of the maximum number of ATM cells to accumulate into an
MPLS packet. The remote peer will also signal the maximum number of concatenated cells it is
willing to accept in an MPLS packet. When the lesser of (the configured value and the signaled
7750 SR OS Services Guide
Virtual Leased Line Services
Page 269