Configuring Service VRRP Parameters
VRRP parameters can be configured on an interface in aservice to provide virtual default
router support which allows traffic to be routed without relying on a single router in case of
failure. VRRP can be configured the following ways:
Non-Owner VRRP Example
The following displays a basic non-owner VRRP configuration example:
A:SR2>config>service>ies# info
----------------------------------------------
...
----------------------------------------------
A:SR2>config>service>ies#
Page 334
•
Non-Owner VRRP Example on page 334
•
Owner Service VRRP on page 335
interface "testing" create
address 10.10.10.16/24
sap 1/1/55:0 create
vrrp 12
backup 10.10.10.15
policy 1
authentication-type password
authentication-key "testabc"
exit
exit
no shutdown
7750 SR OS Router Configuration Guide