Basic Configurations; Common Configuration Tasks - Alcatel-Lucent 7750 SR Manual

Basic Configurations

•
•
•
•
•
•

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure the VLL
services and provides the CLI commands.
•
•
•
•
7750 SR OS Services Guide
Creating an Epipe Service on page 253
Creating an Apipe Service on page 242
Creating an Fpipe Service on page 265
Creating an Ipipe Service on page 270
Using Spoke SDP Control Words on page 274
Pseudowire Configuration Notes on page 277
→
Configuring Two VLL Paths Terminating on T-PE2 on page 279
→
Configuring VLL Resilience on page 282
→
Configuring VLL Resilience for a Switched Pseudowire Path on page 283
Associate the service with a customer ID.
Define SAP parameters
→ Optional - configure ATM parameters
→ Optional - select egress and ingress QoS and/or scheduler policies (configured in the
config>qos context).
→ Optional - select accounting policy (configured in the config>log context).
Define spoke SDP parameters.
Enable the service.
Virtual Leased Line Services
Page 241