Skip Speed [48] - WEG CFW-11 Programming Manual

Description:
This parameter adjusts the current level (DC braking torque) applied to the motor during the braking.
The programmed current level is a percentage of the inverter rated current.
This parameter works only in the Sensorless Vector control mode.

12.9 SKIP SPEED [48]

The parameters of this group prevent the motor from operating permanently at speed values where, for instance,
the mechanic system enters in resonance (causing exaggerated vibration or noise).
P0303 – Skip Speed 1
Adjustable 0 to 18000 rpm
Range:
P0304 – Skip Speed 2
Adjustable 0 to 18000 rpm
Range:
P0305 – Skip Speed 3
Adjustable 0 to 18000 rpm
Range:
P0306 – Skip Band
Adjustable 0 to 750 rpm
Range:
Properties:
Access groups 01 PARAMETER GROUPS
via HMI:
48 Skip Speed
Functions Common to All the Control Modes
Factory 600 rpm
Setting:
Factory 900 rpm
Setting:
Factory 1200 rpm
Setting:
Factory 0 rpm
Setting:
12-23
12