WEG CFW-11 Programming Manual page 208

Digital and Analog Inputs and Outputs
P0281 – Fx Frequency
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It is used in the digital output and relay functions:
F>Fx and F>Fx
(1)
P0282 – Fx Hysteresis
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It is used in the digital output and relay functions:
F > Fx and F>Fx
(1)
P0283 – DO2 On Time
P0284 – DO2 Off Time
P0285 – DO3 On Time
P0286 – DO3 Off Time
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
Those parameters are used in relay outputs 2 and 3 Timer functions, they adjust the time for the activation or
deactivation of the relay after a transition of the digital input programmed for this function, as detailed in the
parameters of the previous section.
13
Thus, after a DIx transition for activating or deactivating the programmed relay, it is necessary that this DIx remains
in On/Off for at least the time adjusted in the parameters P0283/P0285 and P0284/P0286. Otherwise the timer
will be reset. Refer to the
13-26
0.0 to 300.0 Hz
07 I/O CONFIGURATION
41 Digital Outputs
(2)
0.0 to 15.0 Hz
07 I/O CONFIGURATION
41 Digital Outputs
(2)
0.0 to 300.0 s
07 I/O CONFIGURATION
41 Digital Outputs
Figure 13.5 on page
or 01 PARAMETER GROUPS
or 01 PARAMETER GROUPS
or 01 PARAMETER GROUPS
13-16.
Factory 4.0 Hz
Setting:
41 Digital Outputs
Factory 2.0 Hz
Setting:
41 Digital Outputs
Factory 0.0 s
Setting:
41 Digital Outputs