WEG CFW-11 Programming Manual page 60

Keypad (HMI)
1
Cover for battery access
4
4
Remove the battery with the help
of a screwdriver positioned in
the right side
Press the battery for its insertion
NOTE!
At the end of the battery useful life, please do not discard batteries in your waste container, but use
a battery disposal site.
4-2
Cover
Press the cover and rotate it
counterclockwise
HMI without the battery
7
Figure 4.2 - HMI battery replacement
2
5
Install the new battery positioning it
Put the cover back and rotate it clockwise
3
Remove the cover
6
first at the left side
8