WEG CFW-11 Programming Manual page 195

The indication is done by means of the numbers 1 and 0, representing respectively the "Active" and "Inactive" states of the
inputs. The state of each input is considered as one digit in the sequence where DI1 represents the least significant digit.
Example: In case the sequence 10100010 is presented on the keypad (HMI), it will correspond to the following
status of the DIs:
DI8 DI7
Active Inactive
(+24 V) (0 V)
P0263 – DI1 Function
P0264 – DI2 Function
P0265 – DI3 Function
P0266 – DI4 Function
P0267 – DI5 Function
P0268 – DI6 Function
P0269 – DI7 Function
P0270 - DI8 Function
Adjustable 0 to 31
Range:
Properties:
Access groups 07 I/O CONFIGURATION
via HMI:
Description:
Those parameters make it possible to configure the functions of the digital inputs, according to the adjustable range
listed in Table 13.9 on page
Table 13.8 - Digital inputs status
DI6 DI5
Active Inactive
(+24 V) (0 V)
40 Digital Input
13-14.
Digital and Analog Inputs and Outputs
DI4 DI3 DI2
Inactive Inactive Active
(0 V) (0 V) (+24 V)
or 01 PARAMETER GROUPS
40 Digital Input
DI1
Inactive
(0 V)
Factory P0263 = 1
Setting: P0264 = 8
P0265 = 0
P0266 = 0
P0267 = 10
P0268 = 14
P0269 = 0
P0270 = 0
13-13
13