WEG CFW-11 Programming Manual page 116

VVW Control
Seq. Action/Result
- Monitoring Mode.
1 - Press "Menu"
(right "soft key").
- The group "00 ALL
PARAMETERS" is already
2
selected.
- The group "01
PARAMETER GROUPS" is
3
selected.
- The group "02 ORIENTED
START-UP" is then
4
selected.
- Press "Select".
- The parameter "Oriented
Start-up P0317:No" is
5
already selected.
- Press "Select".
- The content of
"P0317 = [000] No" is
6
showed.
- The content of the
parameter is changed to
7 "P0317 = [001] Yes"
- Press "Save".
- In this moment the
Oriented Start-up routine
is initiated and the
"Config" status is indicated
at the top left part of the
keypad (HMI).
- The parameter "Language
P0201: English" is
8
already selected.
- If necessary, change the
language by pressing
"Select", next
and
language and then press
"Save".
10
10-6
Display Indication
Ready
LOC
0 rpm
0.0 A
0.0 Hz
13:48
Ready
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 13:48
Ready
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 13:48
Ready LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 13:48
Ready
LOC
Oriented Start-up
P0317: No
Return 13:48
Ready LOC
P0317
Oriented Start-up
[000] No
Return 13:48
Ready
LOC
P0317
Oriented Start-up
[001] Yes
Return 13:48
Config
LOC
Language
P0201: English
Type of Control
P0202: V/f 60Hz
Reset 13:48
to select the
Seq. Action/Result
0rpm
- Set the content of P0202
pressing "Select".
Menu
- Next press
9
selecting the option "[005]
0rpm
VVW", and then press
"Save".
Select
- If necessary, change
0rpm
the content of P0296
according to the used line
voltage. Therefore press
Select
"Select". This change will
10
affect P0151, P0153,
0rpm
P0185, P0321, P0322,
P0323 and P0400.
Select
- If necessary, change
the content of P0298
0rpm
according to the inverter
application. Therefore
press "Select". This
Select
change will affect P0156,
11
P0157, P0158, P0401
0rpm
and P0404. The actuation
time and level of the
IGBTs overload protection
Save will be affected.
0rpm
- If necessary, change
the content of P0398
according to the motor
Save
service factor. Therefore
press "Select". This change
12 will affect the value of the
current and the time for
the actuation of the motor
overload protection.
0rpm
- If necessary, change
the content of P0399
according to the rated
Select
13 motor efficiency. Therefore
press "Select".
Display Indication
Config LOC 0rpm
Language
P0201: English
Type of Control
P0202: V/f 60Hz
Reset 13:48 Select
until
Config LOC 0rpm
P0202
Type of Control
[005] VVW
Return 13:48 Save
Config 0rpm
LOC
Type of Control
P0202: VVW
Line Rated Voltage
P0296: 440 - 460 V
Reset 13:48 Select
Config LOC 0rpm
Line Rated Voltage
P0296: 440 - 460 V
Application
P0298: Normal Duty
Reset 13:48 Select
Config 0rpm
LOC
Application
P0298: Normal Duty
Motor Service Factor
P0398: 1.15
Reset 13:48 Select
Config 0rpm
LOC
Motor Service Factor
P0398: 1.15
Motor Rated Eff.
P0399: 67.0 %
Reset 13:48 Select