WEG CFW-11 Programming Manual page 57

A – Mounting Supports
(for surface mounting)
B – Heatsink
C – Top cover
D – Fan with fixing support
E – COMM 2 module (Anybus)
F – Accessory board module
G – FLASH memory module
H – Front cover
I – Keypad (HMI)
1
USB connector
2
USB LED
Off: without USB connection
On/blinking: USB communication active
3
Status LED
Green: Normal operation without fault or alarm
Yellow: In the alarm condition
Blinking red: In the fault condition
Figure 3.2 - CFW-11 main components
Figure 3.3 - LEDs and USB connector
About the CFW-11
3-3
3