WEG CFW-11 Programming Manual page 181

P0192 – Status Encoder Zero Search
Adjustable 0 = Off
Range: 1 = Finished
Properties: RO V/f, VVW and Vector
Access groups 00 ALL PARAMETERS
via HMI:
Description:
On the inverter initialization, this parameter starts on zero.
When the value is changed to 1 (Concluded), it indicates that the zero search function was executed, and this
function returns to the state of Inactive, although P0191 continues equal to one (Active).
Functions Common to All the Control Modes
Factory
Setting:
12-25
12