WEG CFW-11 Programming Manual page 260

Read Only Parameters [09]
Description:
This reading parameter indicates the current (A) of the IGBTs of each phase. In a modular drive, this information is
shown for each Book, and for frame H it is shown for each IGBT module.
P0834 – DIM1 and DIM2 Status
P0835 – Ret. Temperature Fase R
P0836 – Ret. Temperature Fase S
P0837 – Ret. Temperature Fase T
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
These reading parameters indicate, in Celsius degrees (ºC), the temperature of rectifier modules for each phase.
The indication resolution is 0.1ºC (32.18 ºF).
For more information, refer to
16
16-18
-20.0 to 150.0°C
FRAME H and RO
01 PARAMETER GROUPS
45 Protections
09 Read only
Section 15.3 PROTECTIONS [45] on page
Factory
Setting:
15-4.