WEG CFW-11 Programming Manual page 65

Description:
Those parameters set the date and time of the CFW-11 real time clock. It is important to configure them with the
correct date and time so that the fault and alarm record occurs with actual date and time information.
P0200 – Password
Adjustable 0 = Off
Range: 1 = On
2 = Change Password
Properties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
It allows changing the password and/or setting its status, configuring it as active or inactive. For more details on
each option, refer to the Table 5.3 on page 5-5
P0200
0 (Inactive)
1 (Active)
2 (Changed Password)
When the option 2 is selected (Change password), the inverter opens a window for changing the password, allowing
the selection of a new value for it.
P0201 – Language
Adjustable 0 = Português
1 = English
Range:
2 = Español
3 = Deutsche
4 = Français
Properties:
Access groups 01 PARAMETER GROUPS
via HMI:
Description:
It determines the language in which information will be presented on the keypad (HMI).
30 HMI
described next.
Table 5.3 - Options for the parameter P0200
It allows parameter changes via HMI regardless of P0000
It does only allow parameter changes via HMI when the content of P0000
is equal to the password
It opens a window for changing the password
30 HMI
Programming Basic Instructions
Factory
Setting:
Kind of Action
Factory
Setting:
1
5
0
5-5