WEG CFW-11 Programming Manual page 247

P0011 – Cos Phi of the Output
Adjustable 0.00 to 1.00
Range:
Properties: RO
Access groups 09 READ ONLY PARAMETERS
via HMI:
Description:
This parameter indicates the value of the cosine of the angle between the voltage and output current. The electric
motor are inductive loads and, therefore, consumes reactive power. This power is exchanged between the motor and
the inverter and does not produce useful power. According to the operating condition of the motor, the ratio [reactive
power / active power] may increase, resulting in a reduction of the output cosine Ø.
P0012 – DI8 to DI1 Status
Refer to the Item 13.1.3 Digital Inputs [40] on page
P0013 – DO5 to DO1 Status
Refer to the Item 13.1.4 Digital Outputs / Relays [41] on page
P0014 – AO1 Value
P0015 – AO2 Value
P0016 – AO3 Value
P0017 – AO4 Value
Refer to the Item 13.1.2 Analog Outputs [39] on page
P0018 – AI1 Value
P0019 – AI2 Value
P0020 – AI3 Value
P0021 – AI4 Value
Refer to the Item 13.1.1 Analog Inputs [38] on page
P0023 – Software Version
Refer to the Section 6.1 INVERTER DATA [42] on page
P0027 – Accessories Configuration 1
P0028 – Accessories Configuration 2
P0029 – Power Hardware Configuration
Refer to the Section 6.1 INVERTER DATA [42] on page
13-12.
13-20.
13-7.
13-1.
6-2, for more details.
6-2, for more details.
Read Only Parameters [09]
Factory
Setting:
16
16-5