Groups Accessed In The Option Menu In The Monitoring Mode - WEG CFW-11 Programming Manual

Programming Basic Instructions

5.2 GROUPS ACCESSED IN THE OPTION MENU IN THE MONITORING MODE

In the monitoring mode access the groups of the option "Menu" by pressing the right "soft key".
Group
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
04 BASIC APPLICATION
05 SELF-TUNING
06 BACKUP PARAMETERS
07 I/O CONFIGURATION
08 FAULT HISTORY
09 READ ONLY PARAMS.
5
5-2
Table 5.2 - Parameter groups accessed in the option menu of the monitoring mode
All the parameters
Access to groups divided by functions
Parameter for entering the "Oriented Start-up" mode
Only parameters whose contents are different from the factory settings
Parameters for simple applications: ramps, minimum and maximum speed, maximum current and
torque boost. Presented in details in the CFW-11 user's manual at section 5.2.3 - Setting Basic
Application Parameters
Access parameter (P0408) and estimated parameters
Parameters related to functions of parameter copy via FLASH Memory Module, keypad (HMI) and
software update
Groups related to digital and analog, inputs and outputs
Parameters with information on the 10 last faults
Parameters used only for reading
Contained parameters or groups