WEG CFW-11 Programming Manual page 73

25) [P0221 or P0222 programmed for (7 = E.P .)] AND [without DIx (P0263...P0270) programmed for
(11 = Increase E.P .) OR without DIx (P0263...P0270) programmed for (12 = Decrease E.P .)].
26) [P0221 and P0222 not programmed for (7 = E.P .)] AND [with DIx (P0263...P0270) programmed for
(11 = Increase E.P .) OR with DIx (P0263...P0270) programmed for (12 = Decrease E.P .)].
27) [P0202 programmed for (0 = V/f 60Hz) OR (1 = V/f 50Hz) OR (2 = Adjustable V/f) OR (5 = VVW)] AND
[P0231 = 1(No Ramp Ref.) OR P0231 = 2 (Max.Torque Cur) OR P0236 = 1 (No Ramp Ref.) OR P0236
= 2 (Max.Torque Cur) OR P0241 = 1 (No Ramp Ref.) OR P0241 = 2 (Max.Torque Cur) OR P0246 = 1
(No Ramp Ref.) OR P0246 = 2 (Max.Torque Cur)].
28) [P0202 programmed for (0 = V/f 60Hz) OR (1 = V/f 50Hz) OR (2 = Adjustable V/f) OR (5 = VVW)] AND
[DIx (P0263...P0270) programmed for (16 = JOG+) OR (17 = JOG-).
29) P0203 programmed for (1 = PID Regulator) AND P0217 for (1 = On) AND [P0224 programmed for
(0 = , Keys) OR P0227 programmed for (0 =
30) DIx (P0263...P0270) programmed for (29 = DO2 Timer) without DO2 (P0276) programmed for
(29 = Timer).
31) DO2 (P0276) programmed for (29 = Timer) without DIx (P0263...P0270) programmed for
(29 = DO2 Timer).
32) DIx (P0263...P0270) programmed for (30 = DO3 Timer) without DO3 (P0277) programmed for
(29 = Timer).
33) DO3 (P0277) programmed for (29 = Timer) without DIx (P0263...P0270) programmed for
(30 = DO3 Timer).
34) [P0224 programmed for (1 = DIx) OR P0227 programmed for (1 = DIx)] AND [without DIx (P0263...P0270)
programmed for (1 = Run/Stop) AND without DIx (P0263...P0270) programmed for (2 = General Enable)
AND without DIx (P0263...P0270) programmed for (3 = Fast Stop) AND without DIx (P0263...P0270)
programmed for (4 = FWD Run) AND without DIx (P0263...P0270) programmed for (5 = REV Run) AND
without DIx (P0263...P0270) programmed for (6 = 3-Wire Start) AND without (P0263...P0270) programmed
for (7 = 3-Wire Stop)].
35) P0202 se to 3 (Sensorless), 4 (Encoder), 6 (PM with encoder) or 7 (PM Sensorless) and P0297 = 0 (1.25 kHz).
36) P0202 set to 7 (PM Sensorless) and P0297 = 3 (10 kHz).
37) P0297 programmed for:
- 3 or 4 in frame B and P0296 adjusted between 500 V and 600 V.
- 3 or 4 in frame D and P0296 adjusted between 500 V and 690 V.
- 1, 2 or 3 in frames E, F or G and P0296 adjusted between 500 V and 690 V, and in mechanics of the
Modular Drive.
- 1 or 3 in frames F, G and P0296 set between 380 V and 480 V.
- 1, 2 or 3 in frames H or P0296 below 4 for models between 500 V to 690 V.
Inverter Model and Accessories Identification
, Keys)].
6
5-13