Starting-up and Settings
8. In order to copy the contents of the Inverter A parameters to other inverters, repeat the same procedures 5 to 7
described previously.
NOTE!
As long as the keypad (HMI) is performing the reading or the writing procedure, it will not be
possible to operate it.
7
7-6
INVERTER
A
Parameters
INV → HMI
EEPROM
HMI
Figure 7.2 - Parameter copy from "Inverter A" to the "Inverter B"
INVERTER
B
Parameters
HMI → INV
EEPROM
HMI