WEG CFW-11 Programming Manual page 71

Seq. Action/Result
- Monitoring Mode.
- Press "Menu"
1 (right "soft key").
- The group "00 ALL
PARAMETERS" is already
selected .
2
- The group "01
PARAMETER GROUPS"
3 is selected.
- Press "Select".
- A new list of groups is
showed on the display, with
the group "20 Ramps"
4 selected.
- Press until
the group "30 HMI" is
selected.
- The group "30 HMI" is
selected.
5 - Press "Select".
- The parameter "Day
P0194" is already
selected.
6
- Press until
selecting "Read Parameter
Sel. 1 P0205".
- The "Read Parameter
Sel. 1 P0205" is selected.
7 - Press "Select".
In order to return to the standard Monitoring Mode (numerical), you only have to select the options ended with
"#" (values from 1 to 10) in the parameters P0205, P0206 and/or P0207.
Content of the parameter P0205 in numerical form with bigger characters:
Program the reading parameters (P0206 and P0207) in zero (inactive) and P0205 as numerical value (one
option ended with "#"). Thus, P0205 starts being displayed in bigger characters. The
illustrates this monitoring mode.
Run
LOC
1800
11:23
Figure 5.6 - Example of the screen in the Monitoring Mode with P0205 programmed with bigger characters
Display Indication
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
16:10 Menu
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 16:10 Select
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 16:10 Select
Ready 0rpm
LOC
20 Ramps
21 Speed References
22 Speed Limits
23 V/f Control
Return 16:10 Select
Ready LOC 0rpm
27 V/f DC Volt. Limit.
28 Dynamic Braking
29 Vector Control
30 HMI
Return 16:10 Select
Ready 0rpm
LOC
Day
P0194: 06
Month
P0195: 10
Return 16:10 Select
Ready 0rpm
LOC
Language
P0201 : English
Read Parameter Sel. 1
P0205 : Motor Speed #
Return 16:10 Select
Figure 5.5 - Monitoring with bar graph configuration
1800rpm
Content of the parameter P0205, with bigger characters.
Parameters P0206 and P0207 must be programmed
rpm
with 0.
Menu
Programming Basic Instructions
Seq. Action/Result
- Press until
selecting the option
8
"[11] Speed Refer. –".
- Press "Save".
- Press "Return".
9
- Press "Return".
10
- Press "Return".
11
- The display returns to the
Monitoring Mode with
12
the speed indicated by a
bar graph.
Display Indication
Ready 0rpm
LOC
P0205
Read Parameter Sel. 1
[011] Speed Refer. -
Return 16:10 Save
Ready 0rpm
LOC
Language
P0201 : English
Read Parameter Sel. 1
P0205 : Speed Refer. -
Return 16:10 Select
Ready 0rpm
LOC
27 V/f DC Volt. Limit.
28 Dynamic Braking
29 Vector Control
30 HMI
Return 16:10 Select
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 16:10 Select
Ready LOC 0rpm
rpm 5%
0.0 A
0.0 Hz
16:10 Menu
Figure 5.6 on page 5-11
5-11
5