WEG CFW-11 Programming Manual page 66

Programming Basic Instructions
P0205 – Reading Parameter Selection 1
P0206 – Reading Parameter Selection 2
P0207 – Reading Parameter Selection 3
Adjustable
Range:
5
Properties:
Access groups
via HMI:
Description:
Those parameters define which variables, and in what manner they will be shown on the keypad (HMI) display in
the monitoring mode.
The options that present the symbol "#" at the end indicate that the variable will be displayed in absolute numerical
values. The options ended with the symbol "–", configure the variable to be displayed as a bar graph, in percentage
values. More details on this programming can be seen in the
MONITORING MODE SETTINGS on page
5-6
0 = Not selected
1 = Speed Reference #
2 = Motor Speed #
3 = Motor Current #
4 = DC Link Voltage #
5 = Motor Frequency #
6 = Motor Voltage #
7 = Motor Torque #
8 = Output Power #
9 = Process Variable #
10 = Setpoint PID #
11 = Speed Reference -
12 = Motor Speed -
13 = Motor Current -
14 = DC Link Voltage -
15 = Motor Frequency -
16 = Motor Voltage -
17 = Motor Torque -
18 = Output Power -
19 = Process Variable -
20 = Setpoint PID -
21 = SoftPLC P1010#
22 = SoftPLC P1011#
23 = SoftPLC P1012#
24 = SoftPLC P1013#
25 = SoftPLC P1014#
26 = SoftPLC P1015#
27 = SoftPLC P1016#
28 = SoftPLC P1017#
29 = SoftPLC P1018#
30 = SoftPLC P1019#
31 = PLC11 P1300 #
32 = PLC11 P1301 #
33 = PLC11 P1302 #
34 = PLC11 P1303 #
35 = PLC11 P1304 #
36 = PLC11 P1305 #
37 = PLC11 P1306 #
38 = PLC11 P1307 #
39 = PLC11 P1308 #
40 = PLC11 P1309 #
01 PARAMETER GROUPS
30 HMI
5-10.
Factory
Setting:
Section 5.6 DISPLAY INDICATIONS IN THE
P0205 = 2
P0206 = 3
P0207 = 5