WEG CFW-11 Programming Manual page 205

N = P0002 (Motor Speed).
N* = P0001 (Speed Reference).
Nx = P0288 (Nx Speed) – It is a reference point of the speed selected by the user.
Ny = P0289 (Ny Speed) – It is a reference point of the speed selected by the user.
Ix = P0290 (Ix Current) – It is a reference point of the current selected by the user.
Is = P0003 (Motor Current).
Torque = P0009 (Motor Torque).
Tx = P0293 (Tx Torque) – It is a reference point of the torque selected by the user.
PVx = P0533 (PVx Process Variable) – It is a reference point selected by the user.
PVy = P0534 (PVy Process Variable) – It is a reference point selected by the user.
Nt = Total Reference (refer to the
Hx = P0294 (Hx Time).
F = P0005 (Motor Frequency).
Fx = P0281 (Fx Frequency) – It is a reference point of the motor frequency selected by the user.
PLC = Refer to the PLC accessory manual.
(a) N* > Nx
N*
ON
Relay/
Transistor
OFF
(c) N < Ny
N
P0287
P0287
Relay/
Transistor ON
OFF
Figure 13.8 on page 13-33).
Nx (P0288)
Time
OFF
Ny (P0289)
Time
ON
Digital and Analog Inputs and Outputs
(b) N > Nx
N
P0287
P0287
ON
Relay/
Transistor OFF
(d) N = N*
N
N*
ON
Relay/
Transistor
OFF
Nx (P0288)
Time
OFF
Time
OFF
13-23
13