Installation Of Drive Shaft Housing Ass'y - TOHATSU MFS25 Service Manual

Put upper mount q, washer, rubber and bolt w into engine
8.
base 5 hole, attach mount retainer e, and tighten bolt r
with specified torque.
Mount Retainer Bolt r :
6 N·m ( 4 lb·ft ) [ 0.6 kgf·m]

9) Installation of Drive Shaft Housing Ass'y

Insert upper mount bolt 1 and lower mount bolt 2 into
1.
swivel bracket ass'y 3 (upper and lower).
Put upper mount nut 4 and tighten nut 4 to specified
2.
torque. Lock nut with lock tab 5.
Upper Mount Nut 4 :
21 N·m ( 15 lb·ft ) [ 2.1 kgf·m ]
Put lower mount nut 6 and tighten to specified torque.
3.
Lower Mount Bolt & Nut 6 :
40 N·m ( 29 lb·ft ) [ 4.0 kgf·m ]
Put mount cover 7 and tighten bolt 8 to specified torque.
4.
Mount Cover Bolt 8 :
6 N·m ( 4 lb·ft ) [ 0.6 kgf·m ]
25/30 2006
w
q
e
r
1342 1342
1342
5
1
3
2
5
7
1342 1342
1342
7-19