Removing Propeller Shaft Housing Ass'y - TOHATSU MD 70-90C2 Service Manual

11) Removing Propeller Shaft Housing
Ass'y
Loosen and remove bolts 1.
1.
2. Use propeller shaft housing puller to pull out propeller
shaft housing to the position where O ring of the housing
can be removed.
Propeller Shaft Housing Puller Ass'y 2 :
P/N. 353-72252-0
3. Hold propeller shaft and remove propeller shaft housing
ass'y.
When pulling out propeller shaft housing ass'y,
remove clutch push rod and steel balls together
with the housing ass'y.
TLDI 75/90C2 2010
1
2
3
3 Propeller Shaft Housing Ass'y
6
6-15