Delete Snmp Community; Show Snmp Community - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

102-9 delete snmp community

Description
This command is used to remove a specific community string.
Format
delete snmp community <community_string 32>
Parameters
<community_string 32> - Enter the community string that will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete an SNMP community:
DGS-3620-28PC:admin#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3620-28PC:admin#
102-10

show snmp community

Description
This command is used to display community string configurations.
Format
show snmp community {<community_string 32>}
Parameters
<community_string 32> - (Optional) Specifies the community string to be displayed.
Note: If a community string is not specified, all community string information will be
displayed.
Restrictions
None.
1129